The potato gun is an experimental device that can fire a cylinder of potatoes. It is an air-pressured cannon, which uses a flammable gas as the propellant. In addition to its ability to shoot potatoes, it can also be used to fire other projectiles.
Average muzzle velocity of a cylindrical potato projectile
The average muzzle velocity of a cylindrical potato projectile in a potato gun was determined by a series of trials using five different propellants. Acetylene (C2H2) produced the fastest and longest muzzle velocities followed by propane and ethanol.
A high-speed video camera was used to record the acceleration of the potato projectile at 2000 frames per second. Changes in velocity over time were then calculated. The position of the potato in the barrel was also computed.
This is a common method of estimating muzzle velocities. A number of studies have been conducted on the subject. Usually, the launcher is a focus of the research, although the internal ballistics of the cannon are often inferred from the muzzle velocity.
In the past, a friction modified version of the theoretical equation was found to be accurate for a potato mass of over 100 g. It suggested increasing the velocity of the cannon by decreasing the mass of the projectile.
Experimental propellants for potato gun
A potato gun is a device that fires a projectile at high speeds. While this may sound like fun, it can also be dangerous. In fact, careless handling can cause serious injury. To prevent this from happening, it’s important to follow basic safety rules and directions.
Potato cannons use pneumatic air pressure to force the projectile out of the barrel. They can be a relatively safe way to fire a projectile, but they’re also illegal in some jurisdictions. For safety reasons, always be sure to abide by these rules when using a potato gun.
The experimental propellants used were acetylene, butane, and methanol. Five trials were conducted for each propellant.
The average muzzle velocity of a cylindrical potato projectile produced by each propellant was determined. Each trial was recorded and plotted to calculate the relationship between the velocity and position of the projectile in the barrel. Using a polynomial model, the velocity was calculated as a function of time.
Movies and TV appearances
The potato gun has been around for a while, but it has only recently made its big screen debut. It has been the subject of many television shows and movies. This list includes a few of its better known contemporaries.
One of the first spud gun related television episodes was the hit show Workaholics. Dwight Schrute mentioned the spud in more than one of his tv series episodes. There was also a game show, Aliens in the Attic, that featured the spud as its weapon of choice. And as for video games, the spud is a staple in many of the popular titles of the past.
Among other media grails, the spud gun has been featured in the games Bully and Bully: Back in the Game. Likewise, the spud has adorned the pages of several books. Several spud guns have been found to have been manufactured by Rockstar Games. In fact, the company has made a number of video games, such as the eminently forgettable Bully: Back in the Game, that feature the spud as its weapon of selection.
Safety concerns
A potato gun is a dangerous device. It can kill or injure people. There are a number of factors that can lead to an accident. For example, if you fail to load the gun properly, you could end up hurting yourself or others.
The best way to prevent injury is to follow basic safety guidelines. You should never fire a spud gun without a clear landing area and avoid looking down the barrel.
When you’re building a potato cannon, be sure to use high quality solvent. Glue should be let dry for at least 24 hours before you shoot it.
The most common fuel for a spud cannon is hairspray. Butane and propane are also used. Fuels such as ethanol are used in a high-volume burst. If your spud gun is using a solid fuel, such as gasoline, be sure it’s not too powerful.
The safety of a spud cannon depends on the way it’s designed. If you’re working with a pneumatic spud cannon, you should never exceed the pipe’s pressure rating.